Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions

Research output: Contribution to journalJournal articleResearchpeer-review

Standard

Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions. / Viegas, Isabelle M.A.; Rinnan, Åsmund; Andersen, Simon I.

In: Energy and Fuels, Vol. 37, No. 8, 2023, p. 5757–5765.

Research output: Contribution to journalJournal articleResearchpeer-review

Harvard

Viegas, IMA, Rinnan, Å & Andersen, SI 2023, 'Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions', Energy and Fuels, vol. 37, no. 8, pp. 5757–5765. https://doi.org/10.1021/acs.energyfuels.2c03313

APA

Viegas, I. M. A., Rinnan, Å., & Andersen, S. I. (2023). Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions. Energy and Fuels, 37(8), 5757–5765. https://doi.org/10.1021/acs.energyfuels.2c03313

Vancouver

Viegas IMA, Rinnan Å, Andersen SI. Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions. Energy and Fuels. 2023;37(8):5757–5765. https://doi.org/10.1021/acs.energyfuels.2c03313

Author

Viegas, Isabelle M.A. ; Rinnan, Åsmund ; Andersen, Simon I. / Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions. In: Energy and Fuels. 2023 ; Vol. 37, No. 8. pp. 5757–5765.

Bibtex

@article{9f3620dee2644608a932704fb8d607ec,
title = "Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions",
abstract = "Fluorescence spectroscopy is a promising technique to quantify crude oil-in-water because it provides information on both dissolved and dispersed molecules. One of the challenges of measuring properties of dispersions is the creaming of droplets, mainly due to density differences with the continuous phase. The addition of isopropanol to oil-in-water dispersions is an often-recommended trick to prevent the creaming of dispersed oil and obtain more reproducible measurements. Although isopropanol does not in itself fluoresce, the aim of the present work was to investigate if the emission from crude oil-in-water would be affected by the addition of isopropanol. The data set comprised synchronous fluorescence and emission spectra of 193 samples of crude oil-in-water/isopropanol mixtures, with oil concentrations varying from 10 to 1271 mg L-1 covering typical concentrations along the water treatment system offshore and isopropanol mass fractions from 0 to 1. Selected spectral features were used as input for principal component analysis, from which it was observed that the samples clustered into three groups. The isopropanol content in each mixture and, consequently, the dielectric constants were found to be the main underlying factors driving the shape and intensity of the emission bands. In the range of 0.01 to 0.5 w/w of isopropanol, the samples became milky which cleared at higher isopropanol content. Additional experiments showed that significant changes in the spectral shapes and emission intensities were observed more as a function of the isopropanol content than of the actual oil concentration. Furthermore, the quantum yield of crude oil is highly dependent on the isopropanol-to-water fraction, which means that adding isopropanol to crude oil-in-water dispersions is not advisable for oil quantification purposes by fluorescence spectroscopy.",
author = "Viegas, {Isabelle M.A.} and {\AA}smund Rinnan and Andersen, {Simon I.}",
note = "Publisher Copyright: {\textcopyright} 2023 American Chemical Society.",
year = "2023",
doi = "10.1021/acs.energyfuels.2c03313",
language = "English",
volume = "37",
pages = "5757–5765",
journal = "Energy & Fuels",
issn = "0887-0624",
publisher = "American Chemical Society",
number = "8",

}

RIS

TY - JOUR

T1 - Effect of Isopropanol on the Fluorescence of Crude Oil-in-Water Dispersions

AU - Viegas, Isabelle M.A.

AU - Rinnan, Åsmund

AU - Andersen, Simon I.

N1 - Publisher Copyright: © 2023 American Chemical Society.

PY - 2023

Y1 - 2023

N2 - Fluorescence spectroscopy is a promising technique to quantify crude oil-in-water because it provides information on both dissolved and dispersed molecules. One of the challenges of measuring properties of dispersions is the creaming of droplets, mainly due to density differences with the continuous phase. The addition of isopropanol to oil-in-water dispersions is an often-recommended trick to prevent the creaming of dispersed oil and obtain more reproducible measurements. Although isopropanol does not in itself fluoresce, the aim of the present work was to investigate if the emission from crude oil-in-water would be affected by the addition of isopropanol. The data set comprised synchronous fluorescence and emission spectra of 193 samples of crude oil-in-water/isopropanol mixtures, with oil concentrations varying from 10 to 1271 mg L-1 covering typical concentrations along the water treatment system offshore and isopropanol mass fractions from 0 to 1. Selected spectral features were used as input for principal component analysis, from which it was observed that the samples clustered into three groups. The isopropanol content in each mixture and, consequently, the dielectric constants were found to be the main underlying factors driving the shape and intensity of the emission bands. In the range of 0.01 to 0.5 w/w of isopropanol, the samples became milky which cleared at higher isopropanol content. Additional experiments showed that significant changes in the spectral shapes and emission intensities were observed more as a function of the isopropanol content than of the actual oil concentration. Furthermore, the quantum yield of crude oil is highly dependent on the isopropanol-to-water fraction, which means that adding isopropanol to crude oil-in-water dispersions is not advisable for oil quantification purposes by fluorescence spectroscopy.

AB - Fluorescence spectroscopy is a promising technique to quantify crude oil-in-water because it provides information on both dissolved and dispersed molecules. One of the challenges of measuring properties of dispersions is the creaming of droplets, mainly due to density differences with the continuous phase. The addition of isopropanol to oil-in-water dispersions is an often-recommended trick to prevent the creaming of dispersed oil and obtain more reproducible measurements. Although isopropanol does not in itself fluoresce, the aim of the present work was to investigate if the emission from crude oil-in-water would be affected by the addition of isopropanol. The data set comprised synchronous fluorescence and emission spectra of 193 samples of crude oil-in-water/isopropanol mixtures, with oil concentrations varying from 10 to 1271 mg L-1 covering typical concentrations along the water treatment system offshore and isopropanol mass fractions from 0 to 1. Selected spectral features were used as input for principal component analysis, from which it was observed that the samples clustered into three groups. The isopropanol content in each mixture and, consequently, the dielectric constants were found to be the main underlying factors driving the shape and intensity of the emission bands. In the range of 0.01 to 0.5 w/w of isopropanol, the samples became milky which cleared at higher isopropanol content. Additional experiments showed that significant changes in the spectral shapes and emission intensities were observed more as a function of the isopropanol content than of the actual oil concentration. Furthermore, the quantum yield of crude oil is highly dependent on the isopropanol-to-water fraction, which means that adding isopropanol to crude oil-in-water dispersions is not advisable for oil quantification purposes by fluorescence spectroscopy.

U2 - 10.1021/acs.energyfuels.2c03313

DO - 10.1021/acs.energyfuels.2c03313

M3 - Journal article

AN - SCOPUS:85152208239

VL - 37

SP - 5757

EP - 5765

JO - Energy & Fuels

JF - Energy & Fuels

SN - 0887-0624

IS - 8

ER -

ID: 346061604